Frequently Asked Questions

Straight answers from our master plumbers.

No. Our systems use a combination of sediment and catalytic carbon cartridges. We feel that R.O. “strips” water of its natural minerals and leaves you with “dead” water.

Stainless steel is a non-porous material.

Incredibly durable and anti-microbial. Used in hospital operating rooms for this very reason.

Stainless filtration systems can operate safer under water pressure.

The most honest answer is: it depends on your water conditions. However, on average, a sediment-only cartridge is replaced every 6 months and a full set is replaced annually.

The limited lifetime warranty covers the construction of the stainless filtration system itself (filter heads, connections and canisters).

What is NOT covered: drain valves, pressure gauges, canister o-rings, and electronic meters.

We are currently installing our systems on Long Island, NY and some surrounding areas.

More installation locations coming soon!

Yes! There are several ways to reach us if you require support.

Email: info@cffilters.com

Ph: 516-500-0356

Web Chat: Just click the floating icon on our website.

C.L.E.A.R. stands for Contaminant Level Evaluation and Remediation. It is our data-driven
process for evaluating your water source, local water-quality information, household needs, and
specific concerns before designing your filtration system.

We consider your location, water source, available water-quality reports, test results, household
size, plumbing conditions, flow requirements, and the contaminants you want to address. We
then select and arrange the appropriate filtration media for your home.

Every project begins with a water evaluation. We review available municipal reports and local
water data and may recommend laboratory testing when more precise information is
needed—especially for private wells, unusual odors, staining, or other specific concerns.

Yes. City and well water can present very different challenges. C.L.E.A.R. allows us to design
the system around the actual water source rather than using the same cartridge combination for every property.

Most preconfigured systems use the same media regardless of the customer’s water. CFF
systems are custom-configured through C.L.E.A.R., hand-built from stainless steel, and sized for the property’s flow and filtration requirements.

Yes. Our cartridge-based systems are designed to remain adaptable. Media can be changed as water conditions, household needs, or contaminant concerns evolve.
In many installations, yes. Additional stages or specialty treatment can be incorporated when adequate space, flow capacity, and plumbing access are available.
The modular design allows cartridge media to be updated as new information and treatment options become available. Newly identified contaminants must still be evaluated individually because no single cartridge addresses everything. Construction and System Design
Stainless steel provides exceptional strength, durability, temperature tolerance, and resistance to corrosion. It also allows us to build a long-lasting system without relying on large plastic filter housings.
Our systems are designed, hand-assembled, and pressure-tested on Long Island, New York, by experienced Licensed Master Plumbers.
Yes. Every assembled system is pressure-tested and inspected before it leaves our facility.
Whole-house reverse osmosis can create substantial wastewater, require storage and repressurization equipment, and produce low-mineral water that may be aggressive toward certain plumbing materials. CFF focuses on properly designed cartridge filtration that addresses the property’s water concerns without treating every faucet through reverse osmosis.

Standard sediment and carbon filtration does not intentionally strip all naturally occurring
minerals from the water. If hardness-control or specialty media is included, its effects will
depend on the specific configuration and water conditions.

Contaminants and Water Problems

No—and that is intentional. Each configuration is designed around the customer’s water conditions. The contaminants addressed depend on the cartridges and media selected through the C.L.E.A.R. process.
Certain types of PFAS may be reduced using appropriately selected carbon or specialty media. However, PFAS compounds and 1,4-dioxane require careful, contaminant-specific evaluation.
Yes. When equipped with the proper carbon media, a system can be designed to reduce chlorine, chloramines, and many associated taste and odor problems.
Specialty cartridges and media are available for many specific contaminants. Because treatment requirements vary, we evaluate the water data, concentration, flow rate, and appropriate media before making a recommendation.
Yes. These symptoms can be caused by iron, manganese, hydrogen sulfide, sediment, aging plumbing, or a combination of conditions. We first identify the likely source and then recommend the appropriate cartridge configuration or additional testing.
A system can include specialty media intended to reduce hardness-related scale. However, results depend on the hardness level, water chemistry, flow rate, and cartridge capacity. CFF does not install conventional salt-based standalone water softeners.
The C.L.E.A.R. evaluation reviews available water-quality reports and location-based data. When local information is insufficient—or when a private well or specific problem is involved—we may recommend certified laboratory testing. Selecting and Installing a System
The correct model depends on the number of bathrooms, expected flow rate, available installation space, water source, and the number of treatment stages required. We use this information to recommend the appropriate Alpha configuration.
A properly sized and maintained system is designed to minimize pressure loss. Our full-port stainless steel construction supports strong flow, but overdue cartridge replacement can eventually restrict pressure.
Space requirements vary by model. The installation must also provide enough clearance to remove the canisters and replace cartridges safely. We review the proposed location before finalizing the system.
Most standard Alpha cartridge systems require neither electricity nor a backwash drain. A UV sterilizer requires a nearby electrical supply, and certain specialty equipment may have additional requirements.
Not necessarily. Whole-house filtration treats the water throughout the property. An Alpha Mini can be added when the customer wants additional treatment specifically for drinking and cooking water. Or if they are concerned with the condition of their water piping between the Whole House System and the point of use like a sink.
Yes. Depending on the model and installation conditions, systems can be mounted to a suitable wall or installed on a properly designed floor-standing frame.
Yes. A properly valved bypass allows the building to remain supplied with water while the filtration system is being serviced or isolated.
Installation should be completed by a qualified, licensed plumbing professional familiar with local codes and whole-house water systems.
CFF serves local customers directly and supplies systems to customers outside the region. Installation availability depends on location. Systems can also be provided for installation by the customer’s licensed plumber.
Yes. We can supply system information and installation guidance so your licensed plumber can complete the installation properly.
Replacement frequency depends on water quality, usage, contaminant levels, cartridge capacity, and the selected media. CFF provides a recommended service schedule for each system.
Follow the service schedule supplied with your system and watch for changes in pressure, flow, taste, odor, or water appearance. Pressure gauges can also help identify increasing restriction across the filtration stages.
Overused cartridges can become restricted, reduce water pressure, or stop providing their intended level of treatment. Timely replacement protects system performance and helps maintain water quality.
Annual cost varies according to the number of stages, cartridge types, specialty media, water conditions, and service frequency. A cartridge and maintenance estimate is provided with your system recommendation.
Yes. Our White Glove Service options can include cartridge replacement, inspection, pressure checks, UV service when applicable, and reminders for upcoming maintenance.
Yes. UV bulbs must be replaced according to the manufacturer’s service interval, and the quartz sleeve and chamber should be inspected and cleaned as needed to maintain proper operation.
The lifetime warranty applies to the assembled plumbing components and stainless steel canisters supplied as part of the original CFF system, subject to the warranty’s installation, maintenance, and usage requirements.
No. Cartridges, O-rings, pressure gauges, UV bulbs, and similar service items are not covered as lifetime components because they require routine replacement or maintenance.
Yes. Cross-threading, incorrect assembly, physical damage, improper piping support, freezing, excessive operating conditions, or installation that does not follow supplied requirements may void applicable warranty coverage.
Using cartridges that are incompatible, incorrectly sized, or not approved for the system can affect performance and may void applicable warranty coverage.
Lead times depend on the system configuration, component availability, project size, and current production schedule. We provide an estimated completion date when the design and order are finalized.
A CFF system is designed around your water, built from stainless steel, hand-assembled by Master Plumbers, and made to remain serviceable and adaptable for years to come. Buy It Once. Have It for Life.